Electronic gun safe lock, fingerprint lock, electronic cabinet lock

Model Number: JJE-NLS8913 Key Specifications/Special Features: Specifications:Using for safe box lockFingerprint lock safe box both can be open by fingerprint and 4 digit codeSystem initialization: Press and hold the red button, the green LED flash by turn, after 10 seconds, when you hear one long beep, that prompts that your system has initialize successfullyEnrollment of the user fingerprints:First step, press the red button

Second step, when you hear “beep” twice short sound, the fingerprint sensor flash red, put your finger on the top of the sensor, when the red light turns off

Third step, you hear a long “beep” you register the fingerprint successfully. If you hear three beeps that mean you register unsuccessfully. Note: if you press the red button you hear three beeps immediately, that tells you fingerprints memory is full

Fingerprint access to unlock:

• Press the “start” button, the fingerprint sensor light red, put your finger which has been registered until the red light turn off, take finger away
• You hear “beep” once long sound, the green LED light, the safe door is open
• If the red and green LED flash three time at the same time, the fingerprint access unsuccessfully

Deleting the user fingerprint:

• Press and hold the red button, the red and green LED flash by turn, after 10 seconds, when you hear one long beep, all fingerprints are deleted

Code:

• To change the code: Press and hold 1 key about 3 seconds until the green LED light appears and you hear a beep, loose the key, input the old code, then press the “start” button to confirm. Not long, you will hear the two short beeps, then input the new code (1-8 digits), then press the “start” button to confirm
• Enter the new code again, press the “start” button, you will hear a long beep, you have changed the code successfully. If you hear three short beeps you have changed the code unsuccessfully
• Introduction: the factory code is “1 2 3 4”
• Use the code to open the door
• Input the code: press the “start” button, you hear a long beep, the motor works then open the door successfully
• Note: when you are in operating process, the red LED lights, that indicate the voltage is low, you need change the battery as soon as possible